English
WDS-50/100D Digital Display Electronic Universal Testing Machine Featured Image
  • WDS-50/100D Digital Display Electronic Universal Testing Machine
  • WDS-50/100D Digital Display Electronic Universal Testing Machine
  • WDS-50/100D Digital Display Electronic Universal Testing Machine

WDS-50/100D Digital Display Electronic Universal Testing Machine


  • Capacity: 50/100KN
  • Crosshead Speed: 0.05-1000 mm/min
  • Accuracy: 0.5
  • Power: 220V±10%
  • Tensile Space: 900mm
  • Weight: 400mm

    • Specification

    Details

    Application

    This equipment is mainly used for all kinds of metal and non-metallic and composite material mechanics performance index of test precision of automatic control and data acquisition system, realized the full digital data acquisition and control process of adjustment in the tensile test, the biggest load tensile test material deformation of tensile strength and elongation elongation technology indexes such as the above test at the end of the test parameters, set by microcomputer controller according to the testat the beginning of the test parameters of automatic calculation, at the same time show the corresponding experimental results,and automatically save;The test parameters can be displayed after the test.

    Specification

    Select model

    WDS-50D

    WDS-100D

    Maximum test force

    50KN 5 tons

    100KN 10tons

    Test machine level

    0.5 level

    Test force measurement range

    2%～100%FS

    Relative error of test force indication

    Within ±1%

    Relative error of beam displacement indication

    Within ±1

    Displacement resolution

    0.0001mm

    Beam speed adjustment range

    0.05～1000 mm/min (arbitrarily adjusted)

    Relative error of beam speed

    Within ±1% of the set value

    Effective stretching space

    900mm standard model (can be customized)

    Effective test width

    400mm standard model (can be customized)

    Dimensions

    720×520×1850mm

    Servo motor control

    0.75KW

    power supply

    220V±10%; 50HZ; 1KW

    Machine weight

    480Kg

    Main configuration: 1. Industrial computer 2. A4 printer 3. A set of wedge-shaped tension clamps (including jaws) 5. A set of compression clamps

    Non-standard fixtures can be customized according to customer sample requirements.

    Key Features

    1. Adopt floor structure, High stiffness, lower for tensile, upper for compression, upper for tensile,    lower for compression, double space. The beam is step-less lifting.

    2. Adopting ball screw drive, realize no clearance transmission, make sure the precision control of  the test force and deformation speed.

    3. The shield plate with limit mechanism used to control the beam moving range, in order to avoid  sensor damaged due to the moving distance is too large.

    4. The table, moving beams is made of high quality precision machining steel plate, not only  reduce the vibration generated by specimen fracture, but also improve the stiffness.

    5. Three columns of mandatory orientation, make the main unit rigidity much improved, to further ensure the repeatability of measurement.

    6. Adopt bolt type grip installation, make the grip replace easier.

    7. Adopt AC servo driver and AC servo motor, with stable performance,more reliable.  Have over-current, over-voltage, over speed, overload protection device.

    Standard

    The machine is calibrated as ASTM E4, ISO 75001 international standard. By adding different grips it can do the test of ISO 527, ISO 8295, ISO 37, ISO 178, ISO 6892, ASTM D412, ASTM C1161, ASTM D882, ASTM D885ASTM D918, ASTM D1876, ASTM D4632 and all the force and extension JIS, DIN, BSEN testing standards.

  • Previous:
  • Next:

    • img (3)

    Write your message here and send it to us

    Products categories

    Hit enter to search or ESC to close