Metallurgical Polishing Machine
MP-1B Metallographic Specimen Grinding and Polishing Machine
0102030405
1. Application
The MP - 1B metallographic sample grinding and polishing machine is a frequency conversion stepless speed - regulating single - disk desktop machine, which is suitable for pre - grinding, grinding and polishing metallographic samples. This machine can not only perform light grinding, rough grinding, semi - finish grinding, and fine grinding, but also precise polishing of the samples. It is an indispensable equipment for users to make metallographic samples.
2. Key Features
1.Multi - usage, one machine to complete the whole process of metallographic rough grinding, fine grinding, rough polishing and fine polishing.
2.Six pieces of Φ30mm samples can be polished simultaneously.
3.PLC independent control for the grinding disc and grinding head. The grinding & polishing parameters like rotation speed, grinding & polishing time, rotation direction, water valve on/off etc. can be set and automatically saved, easy to call.
4.Large touch screen interface, convenient for parameter setting, intuitive state display and easy operation.
5.Stepless speed changing for both grinding disc and grinding head. The rotation direction is switchable between FWD & REV.
6.PLC control for water supply and grinding material dispenser.
4. Specification
|
Technical Parameter |
Machine Model |
|
|
MP-1B |
||
|
Structure |
Single-disk desktop |
· |
|
Diameter of grinding and polishing disc |
φ200mm |
· |
|
φ230mm or φ250mm |
O |
|
|
Rotation speed of grinding and polishing plate |
50-1000r/min |
· |
|
Turnover value |
≤2% |
· |
|
Electric motor |
YSS7124、550W |
· |
|
Operating Voltage |
220V 50HZ |
· |
|
Dimensions |
730*450*370 mm |
· |
|
Net weight |
45kg |
· |
|
Gross weight |
55kg |
· |
|
Magnetic disk |
φ200mm、φ230mm or φ250mm |
O |
|
Anti-sticking disc |
φ200mm、φ230mm or φ250mm |
|
|
Metallographic sandpaper |
320#、600#、800#、1200# etc. |
|
|
Polished flannel |
Silk velvet, canvas, woolen cloth, etc. |
|
|
Diamond polishing agent |
W0.5um、W1um、W2.5um etc. |
|
Note：“·” is standard configuration；“ O” is option
3. Standard
IEC60335-2-10-2008
3. Software
Supported Accessories
Tension jaws, Compression plate, 3-Points Bending Test Accessories, Hydraulic Pressure SensorControl Card, Extension meter. PC and Printer (Optional), Pipe, and install tools.
